Takajun's Video Room. VAIO C1-MZX 80GB HDD conversion

2003/09/20

VAIO C1-MZX 80GB HDD conversion

The PC by 120GB x 2 RAID 0 for my eldest son condition does not settle enough, new HDD purchase it dies and being to go, it does, but Deskstar 2.5inch 80GB 26,800 Yen just a little high ones exactly being to have stock, it purchased together.

As for VAIO C1-MZX stacking 60GB from beginning, being to be able to use well enough widely, it does, but last night fumbling the system file too much, if it becomes unstable and how from first applies recovery, that exchange HDD next, it is the circumstance which becomes.

<- VAIO C1-MZX before the dismantling.

First those where first I remove are the hinge cap the left and right which connect substance and LCD. Being to take normally it does, the right side, but the left is different... when the origin just a little one... is... It is what?

It is the hinge installation section of the bottom cover is broken. Did not perceive at all. Without knowing this way, when I use in the long term, it was the place where also the right side where it remains breaks. Being something which does not understand, something does the happiness, it does.

To anyhow, the liquid crystal section, I lower 3 of Keyboard and the substance. While the nail caught, being to overstrain just a little, it deformed Keyboard a little, but I can reset to the origin sufficiently.

Last obstacle, those where preparedness is necessary are this seal. When this is removed, guarantee (being to purchase with Sony Style, during extended guarantee period) it is gone. In any case, I must correct either the hinge breaking, and, it is Okey?

When this seal is peeled off, 3 screws are removed, very easy and HDD come off. In Note of Sony the easiest installation/I remove and that I thought whether it is not form.

If normal if the cover is done with this, it is end, but this time repair of the hinge is necessary. Well, being always to think, it does, but in spite even in the place where power increases, it is thin don't I think.

It meaning that the cable between the liquid crystal / the substance passes repair cannot make the part here, excessively firm. Then the plated griddle of 0.3mm (it is widely used) processing to the seal and the like of the RF section, inserting reinforcement edition from 3 directions, it set with an instant adhesive agent. Because it is reinforcement with interview touching, I think tolerably strength that it was obtained.

While writing this HomePage, being to apply the recovery of C1-MZX, it does, but it ended exactly. After the work of requiring the perseverance power which deletes the unnecessary application like the unnecessary mountain waits.